Well, the saw is NOT mine it belongs to a customer. Bryanr2 want to part with the 2171?
OBTW, the wide discharge clutch cover is standard on JReds but it an extra cost option on the Husqvarnas. I like the saw better than my shoes...
Cool, you don't like my BJ's specials?
2001 Husqvarna 372XP conversion to 372XPW using all OEM parts.. New bearings New seals/gaskets New OEM 51.4mm XPW top end No base gasked (1194)...
Well that 'pull' you feel is actually your bargaining power going down the toilet!
That looks to be an OE which is more like 42cc the NE (with primer bulb) is more like 50cc. I had both OE and NE at the same time, just to see. I...
Saw is sold, on its' way to Canada! Thank you Rottiman! Remember Rochester, NY is only 200ft above sea level, you will have to tune the saw for...
And be careful when putting the carb back on IT IS VERY EASY TO STRIP OUT THE PLASTIC!!!! Given that you should also check out the plastic...
IINM lots of stuff from Europe is on BO right now because of 'holiday' in Europe. If you have a full time job in most European countries you get 1...
Not bad Fuzz! Sentiment is out the window, it looks good go trade it in on a new baby!
unless I am mistaken that is not a 100cc saw, more like 82. (stroke times (π(1/2 bore squared))/1000)=82cc
Anyone running it, have an opinion?
post a pics of the 55.
I'll get on UPS and figure it out. Wait I have a better idea I will be in Port Credit Sept 5,6,7: I could bring the saw with me. Send me a PM!
As long as you are going to replace the impulse grommit you might as well replace the part right next to it 503 16 16-02.
Look at the IPL!
Would like to find a NOS 2101! Failing that a NOS Dolmar 5100S (screamer). I would settle for a Pioneer P-65!
You might want to have a look at the impluse grommet, if dried out or cracked replace it! HVA part # 505 31 07-51. New carb HVA # 503 28 15-04 $72.
You were probably dreaming about winning the Member Designed Saw auction, and the 372XPW that comes along with the win. If it were a nightmare,...
TL did the cylinder, pop-up piston and muffler as a stand alone unit that could be bolted right on with no mods to the saw necessary. About 30...
