Temps. were low here also, 27* all morning yesterday, finally hit 34* about 8:00pm last night w/ the rain, trees dropped .5"+ of ice all at once.....
^^ That's true Pete, it may not matter at all in Eric's stove. Thoughts were as it's a really small hopper, and he & his wife are brand new...
:thumbs:
That's normal - the pellets dropping into the burn pot will cause the almost burnt pellets & ash below to dislodge from the burn pot -> and into...
I hope so too. :yes: But that's done by choice here - with a deep (4") rectangular burn pot on the Francesca, and no "agitator" mechanism of any...
Yup, that's normal. Stove's control panel is 'torching' the remaining material out of the burn pot, with the auger feed shut off. Normal flame...
You'll be a Pellet Roasting veteran, in no time at all. :thumbs: re: electrical service - best advice I can give is treat the stove like any...
:thumbs: It looks like you may need to "dial in" the damper control / intake air from that pic of the flame, and check the burn pot to make sure...
Missed that. :( .. See lots of folks are vested in getting you back up & running .. FHC rules. :dex: As a "sanity check", I'd pull the...
:picard: I'm sure you'll figure it out. :D Follow the vacuum hose(s) inside the back of the unit to where they hookup to the (front) firebox...
If it sat untouched for a year, checking the stove's vacuum ports & lines for obstruction / plug-up would be high on the list here Eric VW ....
Here we go.. :picard: :p
x4 - Hope you have a fun day JustWood ! :eek: You are a contrary Bear, Sir. ;)
Bad-azz tractor = big-azz trailer to move it. :thumbs: ... Your method is probably safer than a tow strap. :whistle: Good luck w/ the tractor...
It sure does, x2 :thumbs:
It sounded just as bad - on the radio. :thumbs: (Returned Emily to UNH this afternoon.)
