Welcome unimog! Clearly you have come to the right place. You're gonna like it here :yes:
:rofl: :lol::rofl: :lol::rofl: :lol: Nailed it!
Well I took some before I saw this post so I'll put them up anyway haha. Here's a pic from the front. The handle itself was bent slightly as...
It's not in the picture billb3. I'll try to take some pics later.
There is a thin piece of sheet metal that guides the primary air handle. It was bent a bit from when I picked up the stove from the previous...
It does not supply the air to the tubes. There is an opening in the rear of the stove that goes to the tubes. Now that I have that straightened...
Well I'm starting to think I'm losing my mind. Maybe I have to go back to the Bill Engvall thread I started. Below is a pic of the primary air...
Thanks wildwest!
As far as I can tell they are. I would have liked to pull them out this summer but I could not see the pins that hold the tubes in place to take...
I'm starting to think it may be a combination of things. Loading too hot, not shutting down quickly enough, etc.
Ok I'll have to check it out closer. I know it has full range but I haven't looked to see how tight it is.
Yeah I'm seeing them now as well. I dont know why I couldn't earlier.
Loon can you repost your pics? For some reason I can't see them
Yep that was everything closed down. However I had not been closing the damper until the temp got high. I'm going to start trying different...
Yes I have verified the primary air closing. It is in the front directly under the door.
Ok I'll try waiting. Patience has never been a strong point of mine :emb:
I haven't done a leak check for the stove body yet. It responds very well to shutting down the air as far as the flames dying down. It just seems...
I guess I need to start experimenting a bit more. I wouldn't have thought I would have excessive draft but it seems as though I do. My chimney...
[MEDIA]
I suppose that could be my problem. Maybe I'm not cutting the air soon enough. I know my tube stove will run differently than your cat stove. I'm...
