waiting period GC act of 1968 - some of the draconian rules in that were lifted in the late 80's. Did a lot of smithing work 80'strough 90's -...
and those that you do are not quite the same any more either. A lot of what we used to use were military powders converted or over runs . most...
You all are going to freak at this- was taught to reload shot shells back in the early 60's- handload litterly - so a nail dulled up for a punch...
about $3k to start for a band mill.
firewood CSS is not a particularly good side hustle return wise. But if you like doing it ( and ya you can drop the gym membership) its ok- Kiln...
tree service customer used it for flooring in new home looked great.
Short story, one of my customers, brand new car, goes to one of those self serve drive car washes. yep Windows won't roll up- from there goes...
Had a 99 f350 4x4 V10, yep pull anything- never pass a fuel station though- some things never change. Crude is down but station prices are...
Firestone Transforce - Yech!
Look at the back side of the blade- just behind the edge or what is left of it - if it looks slight rolled or sloped to the edge that all must be...
iirc chipper blades are 40 deg angle on that. Need A2 tool steel for the plate. It will stand up better than cold or hot rolled, with out heat...
Colt 45 Series 70 about minimum is $900 the next series 80 has an additional safety - really screws up the trigger. It can be defeated with...
didn't fire stove this morning -supposed to get to 75 by 6pm - with more rain- more warm temps to follow which means the blood suckers will hatch out.
Typical of idler bearing /pully assembly all makes and models. first indication is mostly badly frayed or burned belt.
if the new spindles do not have grease zirks add them - the zirks are self tapping provided you use the correct drill bit. i never have had a new...
Goose dropping worse and then the !@#$%^&*()_ dogs roll it besides.
you will need to split that oak small to have dry enough for this coming winter.
Paid $80/log cord for mixed Green hard woods last fall- 6 log cord load- the provider was only about 20 minutes from me.
boiled linseed oil can be had sans any varnish additives as well as any drying agents tung oil not sure. linseed minus varnish just reapply no...
116/ log cord, and that looks to mostly under apx 10" dia. makes for a pretty dense log cord. course + transport no mention of $ /mi for same,...
