I suggest trying setting on a blade of the same make that is trashed prior to the "good " one. Reason being that unlike plate saws and most...
I have a couple around I use for handsaws- faster than trying to set up a machine- do not see many hand saw any more, 20 years ago it would 10 or...
.17mm =.0066 so I am guessing either .177"(4.5mm) air or 17 cal. (.172") rimfire or centerfire powder burner ( ya nit picking)
Most things have an adversion to a 1/2"+ chunk of anything being tossed their way ( 17mm=.66")
Dremel is still the one to beat and everything is compared to them- it's a power tool buy the best and only cry once. That said I have an older...
years ago I had a pair of Brittany spaniels - male- favorite thing to do was go after wood chucks- the female , bless her heart, liked to play...
if dried to less than 20% i don't even notice the scent outside let alone any inside. Thorns that would be Honey locust the true type not the...
very dense for either varity, split it will take 2 years at least to season avg. Locust is a bit tough to ignite so best to have a smaller...
yep those aha moments can reach out and grab ya at times. I was replacing a love-joy style coupling on a machine loosened one nut a bit too far...
In that style I have seen where the shaft is screwed in to far to the tracking adj. block hence when nut is fully tightened binding up the...
please post a picture of the upper wheel / nut assembly, it sounds like something is missing or possible not assembled in the right sequence....
Yes replacing that cat assembly and gaskets would make a world of difference. That is how that stove was designed to be used- the effect of not...
If you are looking for efficiency that simple log wood stove is nowhere near an answer- actually back tracking - about a 1/4 step better than a...
looked up your stove made around 1989- ever Replace your cat? depending on where you look a replacement is around $130. new tech in wood stoves...
some of the new units use the condensate to help cool the Freon by allowing the fan to pick it up and spray it on the coil- hence a bit better...
it is US Stove - run away as fast as you can, if you are looking for a solid less expensive stove Englander or Drolet Both made on this...
yep the tree companies are making pretty good money, never seen so many new trucks, chippers, and bobcats.
I have 2 acres of over grown alpha to mow send him over for a test run.
ethanol fuel - let sit for a few months- ethanol separates from the petroleum - running unit dry and letting it sit- what little is left converts...
carb and fuel line issue- no fuel indicates carb likely has a case of ethanol death. rebuild carb or replace, fuel line and pulse line get hard...
