I don't remember ever seeing a clean out access like you have above the heat exchanger tubes. That's either another difference between the old and...
I fired mine up Saturday. Supposed to be warming up later this week, so it'll probably get shut down later tomorrow. I'll go back to firewood at...
It took me a while to figure that out on mine. I knew something was up when it was running the self clean every three hours or so. Now it's on my...
Myself and spray foam just don't get along. Several years ago when redoing my kitchen I bought a can on my lunch break. I didn't want to leave it...
From what I recall, the distribution blower on mine always stayed on when running on level 3. I don't remember if it stayed on on level 2 or not....
Still have white chit on the ground, but grass is starting to show again. It's supposed to get back into the 50s later this week with up to an...
I don't see any screws in your burn pot. They must have changed their formula since I last burned that chit.
That video never gets old. Your neighbors must have looked at you the same way mine looked at me first time I used a leaf blower for vent...
I bought my house in 2001. I couldnt decide whether to rip out the kitchen or live with what was there. This house was a 'fixer-upper' in every...
Mine was missing the cotter pins when I got it. The pins drop right in on mine and I never bothered replacing the cotter pins. Makes it easier to...
The glass on yours clouds up on top just like mine. They updated the air wash a bit on the newer models. Edit - I should add that after about 11...
The insert doesn't have a name other than 'wood stove'. Easier to say. My daughter named the pellet burning furnace the 'basement monster' due...
Bought a couple bags of American Pellet Company pellets (made in Corunna, MI). Figured I'd give them a shot as they've been turning up quite a...
Here's a pic so you can share in my joy. The apple trees haven't dropped all their leaves yet. The white stuff is clinging to them and makes for...
Saw 1.89 this morning. A few stations are still a bit over 2.00. No complaints here. I'll enjoy it while I can.
Fired up the furnace for its inaugural run this season. It's not terribly cold out (32) but figured I'd make sure all is well before winter really...
Best I can tell is mine was made in 2008. I thought all the auto ignition models had the LCD control panel. I might be wrong.
I heard a story about someone in my area who had an indoor oil tank start to leak while they were on vacation. All I can say is 'ouch'. They came...
This is you: :drunk: This is me: :(
I don't know if you could retrofit a sail switch or not. I suspect its possible, but the little orange neoprene flap doesn't appear to be an...
