I don't think that phase separation is an issue any more. In the early days it was.
They look cool but you can't use the roller chain catcher.
Thanks, I run premium gas because I feel it has better shelf life. I did a little looking and Sunoco says 87 is good for 3 months and 93 is good...
I regret buying my 660 clone saw since the big end rod bearing an a crank bearing failed after 3 tanks of gas.
I primarily run E10. I was driving past this station so it was convenient to get the e free gas. I have about dozen more saws than I need so some...
Maybe I'll do 87 vs mid vs 92 in the future. Actually didn't Redbull do that?
I think e free does have a better shelf life. I usually tell people don't let it sit more than a month. I read something from Stihl or a reputable...
I tested these three fuels and timed my cuts and checked the cylinder temp. [MEDIA]
I like a hookaroon.
I'd also double check the valve adjustment. Sent from my SM-G950U using Tapatalk
The head is big piece that the spark plug threads into. Sent from my SM-G950U using Tapatalk
No cracks or signs of leaks in the intake manifold? Any signs of exhaust gases blowing out the head gasket or head bolts? Sent from my SM-G950U...
When an engine turns over slowly, most of the time it is the valve adjustment but since you adjusted them that is not it. The only places you...
how much HP is the engine? Do you know how big the pump is? How well does the engine run? You may have a vacuum leak? Sent from my SM-G950U...
Was the exhaust glowing b4 the new carb? Sent from my SM-G950U using Tapatalk
Is the muffler plugged up? Sent from my SM-G950U using Tapatalk
When was the last time the valves were adjusted? Sent from my SM-G950U using Tapatalk
They are going to be making a saw better than the 064, the MS500i. It is going to be 13.6lbs and 6.8hp. It is also fuel injected. Sent from my...
[MEDIA]
I never look at their regular emails. Every other Wednesday they put out a new sale flyer in the paper. This week there will be a new on....
