and in some cases better than the OEM part.
Sitting out in the cold yep atf or the same weight as used in the Aircraft hydro systems , or on the expensive side the stuff for snowplows I...
Maybe the thread title should have been Who "was" this?
National code requires and outside air source in MFG. homes. As to stick built that is all over the map.
Don't know about an oak having an effect on Radon but running the stove in the basement sure would- not that much different than one of those...
8" worth of the snow cone material yesterday. LeRoy WI
Mass storage- stone or earth works with channels internally for the heated air to pass through the mass absorbs the heat later releases back into...
Got 4" Tue morning, round 2 starting to night 1-5"or possibly to 8" wet slushy is the description through Thur, ending Thur. night sometime....
hence the reason for really DRY wood. It is actually a coal furnace design that you can burn wood in but as you noted about the smoldering of...
if it's not to bad I just bend them back by hand . It only take's a very little bit of a bow to bind it up in the bar slot. I will either use a...
not a good sign- almost a month early for sticking snow. Looks like I might not be in my shop much this week. I do not like driving US 41 ( 40...
Tecumseh long gone now , Robin also. They were good eng.
the impeller mods do help - never bought a kit - just used pieces from worn out single stage units . Flippin Egas is the bain of every small...
hold chain up so you can look down length - likely bent- might have to move it around a bit to find. redneck repair- 95% of the time I can bend...
Over the years I have had good bad and total disaster type basements. 2 homes ago was the disaster/ nightmare unit late 80's 100 year rains (...
so did they resize the triac or add a heat sink? and or add an over current fuseable link( or fuse) to prevent frying triac?
if bark still on any wood just make some cuts down the length that will help a lot
there is iron in them there words Chaz
And a paying customer takes precedence over warranty
Bingo bases. front and rear are different heights for separate ones , a one piece base should be the same thing or have a milled step in it....
