My 30nc in my 2200 sq ft home ( 6" walls) will keep the place above 69 F at the end of 12 hours which is about when i get home. Still enough coals...
door should not wobble
alcohol on contacts does not always remove the oxidation. it is a game between MFG and repair techs mfg goes cheap[est way possible and we go for...
Cold solder connection and/or oxidized connections- neither is fun to find - In a lot of places there is not enough voltage to drive the nano...
Could rent on of those sewer inspection camera units and run it up the flue for a better look see. Ya I know they make ones for chimneys but...
May not even be a wood fire place but a gas operated one
Geeze that looks like me back in the late 80'safter being crunched by a truck
with a stove temp of 750-800 external that would suggest a exhaust temp in the 1000+ range ( in the center of the flue pipe) at the right mix of...
high speed cnc -the coating promotes faster speeds and longer runs- once item is resharpened it has to be re-coated to achieve those same...
I sharpen a lot of chains, part of my business. I wear out vise assemblies about every 6 months ( the stud and cam tensioner) . Use 3 units one...
milking time
Sorry you got toasted by the corporate conglomerates, For me the rise of the internet has chopped a big chunk out of my business, when their on...
Hate to say it, none of the images has stumped me yet. electrolux vacs were a mainstay of just about every household for many years course them...
department of motor vehicles is the worst offender as they sell your information here in WI. supposedly you can op out of that - but that is...
Crank starts on tractors -yep had a couple on farm one was ok the other was just plain cranky all the time. I think the magneto was going south...
funny -it's a ton of work to make cuts or peel off the bark- basically it's double dipping by the seller. Course sawing through the bark shortens...
lot of different ways to track right down to your key strokes- yes it has become a big problem- information obtained is usually sold - then you...
cutters duller on one side maybe , real culprit could be cutter length not the same between left and right side, ditto for depth gauges not the...
So I have a 3/4 ton truck put 7or8k behind it and range shrinks about 30 percent- seems maybe about the same for and "E" unit? diesel /electric -...
I do not have a picture but remember powdered tooth scrubbing compound in a small box - tooth paste as we know it now did not exist back then. wet...
