This is all they had. Says for head gasket fix (which i don't know is the problem for sure) I could go to o'reilleys and see if they have the k...
Ok, i boiled the original oem thermostat i originally took out and it opened right up, so that's not bad. I double checked this morning for any...
There's 2 kinds of sealer. The main ingredient is sodium silicate. If the leak is getting in the oil, than do not use. Sodium silicate will seize...
I've read the directions as well as a mechanic's suggested way to use the stuff. Reviews say 80% of the time it works
From the little research I've done, this looks like the ticket. Quite a drawn out task from start to finish to get it done kinda. If i had a...
Would the engine overheat with a heater core block? Can i disconnect the hoses going through the firewall and flush with a garden hose or no?
Engine was cold.... really cold. I will try that method and report my results. The Subaru dealer didn't have one when i called. I am planning on...
I did the pressure test and i didnt lose any pressure. I took the cah for a spin after running it a little while, no overheat, cabin had heat but...
Thank you!
Nope, but I'd be complaining then too!
You able to post a link of what this is? I've never heard of that
Yea, it happens within 10 minutes of driving. Right into the overflow tank. Than it spews out from there. I'm looking forward to pressure...
This is definitely where I'm at. I bought this car last year specifically to be my daily driver because i knew that these gas prices would rise....
I picked up a radiator pressure tester after work today. Gonna mes with it tomorrow. I'll post results. If the head gasket is leaking I'll look...
Looks like a head gasket job is about 2k with everything getting replaced, timing belt, water pump and the heads sent to get machined ect. Id be...
I just dont want to dump $125 weekbin fuel into the F250 since my daily driver is now down. Might end up driving my sons '99 subi that has never...
Thanks, my mechanic is done for now probably a hernia, every other place backed up for weeks or cant get parts. Lets go Brandon!
This one looks decent Radiator Pressure Tester Kit
I don't, but thinking i might get one. Any suggestions?
I shouldve boiled or torched the thermo before i spent all this time putting it in. It was wicked tight with the gasket around it. I could barely...
