I sawed some hard maple for a customer and had it kiln dried he finished it himself it was surfaced at the mill after kiln drying and it came out...
I was looking through the posts and I was going to mention that when I came across your pictures !! T.Jeff I have fixed quite a few kubota and...
Tough to see in pictures but it looks like the throttle shaft lever that your idle screw rides against to set your idle and yes that is normal to...
I usually get 1.50-2.50 a disc for the walkway discs( I had to do 1200 of them one time ) they are usually 4-8 inch the wedding discs can really...
I used a winch many times it was a 8000# ramsey mounted on my truck but more times I used the rope come-a-long that hooked to any length of rope...
6 degrees here this morning loaded with locust and oak in the furnace
Nice work !!! on my mill I have the hydraulic clamping so I am able to clamp the piece between 2 blocks of 4x4 to cut them I have a customer that...
They messed up should have put the price at 8.99 for those bargain hunters :rofl: :lol:
Nice ! I still send mine out for sharpening I have no floor space in the shop for s sharpener :hair:and way to busy to add on at the moment JB
Glenmoore Pa :salute: JB
Looks almost like you should have a wearing strip in the opening that would be adjusted with the bolts on the side like a piece of 1/2x1/2 stock...
Yes I do not know what I did :hair:
