I checked to make sure it wasn't the ignition switch . Still nuthin. Checked other things . Still no spark at the plugs. I pulled both the coil...
When I set the points, I barred the engine over till the points were as open as they could be. The rod was up as high as it could go. But not...
I banged the stove pipe to clean the black pipe part. Got a bunch of creasote to come down, raked it forward, threw in a little paper and 3 pieces...
This not wearing long johns makes for more fire starting than what I prefer. Had to start one this morning at 10:30 because it was cloudy and...
Ok. I take it I need the key in the On or Start position for this. ? Yesterday I had troubles with corroded terminals on the battery end . I...
Do you have power into the+ of the coil. If yes do you have pulse out the - side? I don't know how to find that out without grabbin a wire with...
It was blowing a little and full overcast before dinner, I lit a small fire in the stove from some rat tail sticks and 2 year dried slabs. Now it...
It would be Cool if I could easily install the 550 Arctic Cat engine from my snogo ( snowmobile) onto the mill ! That would saw some logs !
That's how I have it hooked up. I set the gap at 20 thousands . Cleaned the points contacts with a dollar bill. Still no spark at the plugs....
I'm Baaacckkk Can anyone tell me if the wire from the ignition goes to the + or - terminal on the coil on this 17 horse Kohler . ? Also, do...
Was wet from this weekend's rain this morning. Sun was out all day wo the puddles dried up and down. . Ground is thawing out. No fire at the...
Did you put a new carb kit in ? It looks Great !!
And the JB and the drill bits. But , I already have a spare bar to play with.
What I plan to do is 1" diameter holes along the center of the bar spaced 4" on center. And a row of 3/4" holes centered above and below...
Not yet. When I do it I'll take some pics and post them. It was 32 years ago that I did that. I wish I would have carried my idea thru to filling...
I think that is great the railroad is helping out . I take it the rail runs close to the fire. Was partly cloudy here this morning with all the...
I have enough to do the walls of the 25 x 34' garage I hopefully will get built this summer. Lord willing ! They were stacked on the property...
Meat, I misread your post :headbang::doh: Can take quite a bit out. Probably 2.5 to 3 lbs from a 36" bar. Not as much as an Oregon Lite bar,...
For me, it's not about taking heat out. Tho I have wished the bar was A LOT cooler many times when it was hot out and I nearly burned myself...
When you have a couple dozen holes in a 36" bar, some of them 1" diameter and your in a bigger than bar length buck, the bar locks up tight as a...
