I should also clarify I have not experimented much with loading any way other than n/s. I may be jumping the gun here and have to try loading...
I will be trying the backwards burn again. I remember having pretty good results last year when you suggested it. I dont expect burn times like...
I almost forgot today is the shortest day of the year. I for one will be happy to see more daylight from here on.
Good morning all! Gotta work a 'half' day today (about 6 hours is a 'half day' right now :headbang:). I hope everyone is enjoying gearing up for...
I twisted it on so the end of the rod is flush with the 'tight twist' on the spring. I think it was HDRock that used a sharpie if I remember...
I pack it as full as I can while still leaving an inch or two below the tubes. Admittedly some of my splits are on the smaller side. I also dont...
In a weird way I'm kinda hoping it works better without the magnets and just cutting the air more works better. I would prefer to run it as...
Just did the morning reload. I'm gonna run this load with the magnet in place and then I'll take it off before the following reload and try your...
I will try this mod out for a bit to see what happens on a reload and report my findings.
Ok I'm confuzzled here... I've been having a problem with the nc30 holding stove top temp and putting out heat. I tested a piece of my wood the...
:rofl: :lol: :popcorn:
We've never had any issues with ours as far as the cold goes (nor the heat for that matter). They are able to get out of the elements which is a...
The goats all have their winter coat grown in nicely here. They looks extra fuzzy this time of year.
That's good info :thumbs: is that true for double wall and a probe too?
Thank you sir! Went through TurboDiesel territory on my way to ChipsFlyin area of the state this morning. It's looking like winter. Snow on the...
Good morning all! Time to get back to reality. Bring on the week....:coffee:
I miss my jeep :( They are awesome vehicles!
Good to have you back CtRider!
I have double wall stove pipe through a thimble in the wall to an insulated ss liner in a masonry chimney. The liner/chimney is about 16 feet. I...
That is every fire for me except I have double wall pipe so its pushing 1000* instead of 500*...
