These are kicking my butt tonight. All I got left is the timing and I can find the thread size off these bolts to pull the flywheel. There a...
One step at a time. I enjoy doing build threads. I learn a lot everytime. :dex:
Looks like the 5105 is winning here and the 6100 is winning on AS. Lol.
Ok boys I want to add this in. I still have to do my ignition advance trials but this pair of saws is just about done. Fin460 has spoken for one...
[MEDIA] The 102/129/80 (saw 1)
[MEDIA] vid was kinda crappy I was being a little to heavy handed at first but this is the 102/131/80 saw.
Ok here they are and give me some opinions. These saws run very very close but you can tell the difference. The 27 blowdown will produce around...
No i havnt. I have that posted on AS too. Last I looked the 6100 was winning there and the 5105 was winning here.
[ATTACH] Both saws back together 1 at 27° bd and 1 at 29° blowdown. Headed to the test log.
Saw is sold pending payment. Headed to michigan.
Well boys didn't get much done tonight. Had to go cut some wood. I had to fall back on the old saws all. That's what u get when you list your...
I would port the 372xp. You will see bigger gains in it than you will the 562xp. IMO. The 372 will handle a 28" bar once ported. :D
Which one do you use the most? :dex:
I'm looking for a 2165 jonsered if anyone has one they want to part with. Condition does not haft to be minty just prefer complete. Lol. Thank you!
[ATTACH] In this pick you can see were I made a line with a ultra fine sharpie.i ground down close to it with a carbide burr and will finish...
[ATTACH] Ok boys thought this little visual may help. This is saw 2. The exhaust now is at 102 deg. This is me making my trans. From the roof of...
Sold pp.
Gotcha! :)
I took this saw in on trade and have no use for it. I threw a like new bar on it and thought I'd see if there's any interest in it here before I...
What do you mean by the chambers cut? More than the squish band cuts I did on these pair of saws.?
