[ATTACH] [ATTACH] this is what you can expect to get for that money in mn
I have a John Deere 2025r been good tractor only lifts around 1000 pounds but only at limited hight. Think it’s rated at 800 ish full hight,...
yep that’s the exact engine, I know they aren’t the quality of the old ones I hope it gives good life i changed oil at 20 hours first time with...
My kohler command pro 14 on my sawmill is made overseas too. Runs nice and I’d like to think a little better built than the average Chinese engine...
So not the same switch just flipped 180 in housing to make off away from handle?
Have 2 500i’s and a 201 tcm in shop for tlc, just did 4 other 500’s for minor stuff, couple 201 tcm and a 194 last week. Sharpened about 4 dozen...
no dolmars up here much so kinda forgot they used the husky style kill switch that seems to like to break for me. Cheap enough to buy a new one...
The carb adjustments won’t do much if it’s to fast depending on style of drive you could add a jack shaft and do a double reduction to get rpm up...
is it too fast at higher rpm? If not it probably would be better to run at 1/2 throttle or so, also giving it a sea foam treatment through the...
I’d save that 950 and bring to the nearest Briggs dealer, has a 2 year consumer warranty. They have a cast iron sleeve in them and forged crank...
All made in China and I’m not so sure the Briggs isn’t made by lifan like the predator. Cub and toro have their own branded engines made by lct...
The upper yellow wire on switch i believe gos to the ignition to ground it out, the lower switch wire is the one that does the grounding of switch...
Probably just the switch still grounding out the low oil circuit. You pulled it out of the block you said so disconnect the switch side both wires...
Your preditor engine you were thinking of probably very similar to the Chinese Briggs on it now. Generally they run a long time but always can...
Yes I actually didn’t realize it’s been 10 years already, all Polaris wheelers have kolplin winches factory on the ones that come with one ect.
Yep I believe Polaris bought them a couple years ago
We have so little walnut that I’d never use for firewood and have a bandmill so wouldn’t ever want to waste it for heat.
My very first saw at about 11-12, was given to me for free when I found it in the back of a garage when I was cleaning it out for a family friend....
The one guy with a tree service I fix saws for used to climb for another guy and he bought the cheap green poulans but didn’t tell the store they...
