I hear ya. It's hard for me to spend $$$ on something I am doing in order to save money. I was himmn' and hawing over whether to spend the...
Good to know, thanks. I've never ran Husky chain......all I've run is Oregon, LPX, LGX or BPX. may try some Duracut DPX loops next time I want a...
Just an FYI. Husky chain is (or at least used to be anyway) made by Oregon. You can run Stihl chain (or any other brand for that matter) as long...
Interesting....my CL 40 ton was actually a bit faster than 9.5sec out of the box as well. Nothing crazy, but a couple hundredths. My Speeco was...
You need to match the correct drive links as well...... Your bar should state the chain you need near the mount holes.
I touched up my chain a few times that day, IIRC. I also remember keeping my bar lube right inside the house door as it was pretty cold.
I helped a buddy in Feb '14 buck up a "10 cord" load he had delivered. Not 100% sure if it was a true 10 cords though. The plan was for him to...
Why use one arm when I have two of them? :picard:
I have a calculator in the garage to calc out whatever I need to and have a graduated container I use to measure the oil.
yup! Although he wanted to know how much gas for 2.6oz of oil at 36:1. :)
2.6*36 = 93.6 oz 93.6/128 = 0.73 gallons of gas mixed with 2.6 oz of oil will yield a 36:1 mix ratio.
Using that chart for 35:1..... 2.56/3.7 = 0.69 gallons.....check.
2.56*35 = 89.6 oz 89.6/128 = 0.7 gallons of gas mixed with 2.56 oz of oil will yield a 35:1 mix ratio. 128oz per gallon. I want to know what...
Not only on FB....we have members here who do the exact same thing. :whistle: :zip:
It's done at a 1/4 cord at time. I basically split till my trailer's full, then shut the splitter off to stack. :)
I finished splitting/stacking my winter's haul today. 11.3 cord this year. Splitter runtime of 9 hours. Started with 6.8 on the hour meter,...
CountyLine vertical/horizontal........
Sounds like I already have a volunteer. :D
Who says one has to spend it at all? :D Seriously though, there are only two spots I would have the room for one. One is where the wood is...
I'd be lying if I said it was not a concern of mine. I'm more concerned about the stuff lower in the stacks, as if the stacks have any lean to...
