If you burn propane as a primary heat source or as a backup heat source (as we do as our primary heat is solid fuel), propane cost per gallon...
Nothing in life is free. I'm sure the delivery cost is built into the price of the product.
Ouch. The older you are the more serious a broken hip becomes. Lost my dear uncle last year to complications from a broken hip. At 72, I'm...
Don't quite understand the hoopla over a stamped versus a fabricated deck. One of my ZTR's has a fabricated deck, the other has a stamped heavy...
Knowing this administration, I'm pretty confident the CEO won't get a response as that letter probably went in the round file. Even if he did...
Getting my popcorn ready for this one...
Never seen an air compressor that starts under a head load, all 3 of mine have unloaders on them. Don't matter how much pressure is in the...
Taking stock of the round griddle I can see she might employ it as a head knocker if I really irritated her. My wife is a 6 foot tall German gal...
Well, wife and I visited the local Cabela's emporium and bought a Lodge pre seasoned cast iron round griddle that I immediately drop tested on...
Additionally, while I own a Champion gas power inverter genny which I use with the RV and to power corded tools in the field (I put it in the bed...
Keep in mind that inrush (starting) amps is normally 3 times running amperage. If the draw is 7.8 amps, the starting amps will be 23.
Inflation....lol Pferd must sub contract to some Chinese file manufacturer. I don't buy Pferd anyway. I buy Simmonds.
I've had less than stellar experiences with those carbs as well (Amazon and Flea Bay). Chinese carbs are real hit and miss. I always take them...
First thing I do when I get out of bed is take a leak.....lol
Measure the coupling size on the pump (probably 3/4"). The Pred 6.5 is 3/4" pto shaft I have excellent service from Pred motors. Have a 6.5 on...
Corn is even better, least for me. I get nothing but a little fly ash and if I really want it to rock and roll, I'll mix in a little oilseed....
I priced both the Ryobi and the E-go electric ZTR's and found then to be way more than I was willing to part with. I can buy a boatload of gas...
I have to ask why Douglas Fir pellets are so much more than mixed hardwood? I'd think hardwood pellets would be better, much like burning chunk...
All I can say is ouch... Still holding here at $299 a ton. Wish gas and diesel were holding, they are not.
Nissan's have notoriously poor transmissions and a high failure rate at low mileage. I'd steer clear of any of them that are ICE units.
