I looked at the climbing gear I had and the rigging I use just for my climbing gear let alone the loop runners, carabiners , lowering devices,...
This kid should stick it out! For 6 years old he's dead nuts on... I was a drummer back in the 60's , this kid is great! [media]
I actually turned while running the chipper and saw the OSHA guy two blocks away with binoculars watching my buddy flying the bucket trimming...
I did it for 15 years, worked for a few different tree companies, one guy was a licensed Arborist... Taught me a lot plus I went to seminars.. Did...
Todd , stove has such a good draft , at some point I'd like to install a pipe damper just to see how the stove would run, maybe slowing the...
Look up the PH on Woodstock's site and look under the parts list... scroll way down until you get to the pictures of the back of the stove, you'll...
Todd, on average about 5 minutes... The PH has such a strong start up draft that you could easily get green wood going.. The intake has three...
PTC surface gauge and Tempoint flue gas gauge for my pipe... Both stoves have the same set up..[ATTACH] [ATTACH]
I do the same with my PH,,, 500-600 flue gas temp , then close things up...
Talked to Woodstock about probing the PH... Would have to drill the stone, then the griddle and stick a probe in the top...Don't think I'll even...
Hopefully he will chime in..
OK, Thanks Ray...
Absolutely would consult with them first... Placement would be critical,,, time for the dial caliper step gauge and a straight edge to measure to...
I am wondering if the reading can be taken from the intake side of the cat verses the exhaust side.
If I do anything , I think I would drill for a simple drop in mechanical probe...after looking things over... I'll consult with Woodstock as I...
I wondering if one could drill straight down from the top of the stove for a cat probe.. biggest thing would be to drill through the shield below...
No way to do it then... I have to come in the back of the stove and have about a 12-14 in run to get to the back side of the cat , which is where...
Clem I think it only makes sense not to have a rush of heat suddenly hitting the cat element, instead slowing the fire first , then closing the by...
Looks fine to me Steve.... My PH cat has stayed amazingly clean as well... One thing I always did with the Fireview and now my PH,,, when the...
I'd like to have that for my Progress Hybrid..There's a rear bolt that can be removed to snake the cable in to get the probe to the cat... I'd...
