Correct, mother EPA. Most old saws (if they have a muffler at all) it is usually an empty can. Not much to be done with it, that saw has been...
Sean, check your PMs your saw is on its' way in the AM. Sent the tracking number in the PM.
Yes, the member designed saw is an OEM XPW P/C 51.4mm, bore, for a displacement of 74.6cc.
OK guys, pending Moderator approval thiss is how the auction will work. Keep in mind that the Moderators need to approve the following, so there...
Visible will be in the classified section. Will post rules later in the day and they will be posted again as the first post in the auction thread.
Begins Friday October 3, and runs through Monday October 13. Keep an eye out for the banner message and link!
Fuzz, if not yet decided, stone is the way to go! Shake shingle, slate or standing seam copper for the roof!
I saw somewhere that there is a WTA carb that is a direct bolt on, supposed to have both H&L adjustments. Can't remember where I saw that so don't...
Fuzz, that little machine is WAY COOL. I'd like to have one, or at least be able to borrow one.
The saw is assembled from parts around the shop. Completely rebuilt from split cases up. It is ugly uses JRed 2171 case and needs a new clutch...
Saw is sold, pending payment, sorry. What are you looking for, I may have it. How about a ported 372XP, $375, PHO plus ship.
If the fuel lines need replacing there is a redneck fix that does not require that you open the tanks. I'll see if I can find it and post a link.
Bill, those are GREAT little saws, all metal. The fuel and bar oil tanks are on the front of the saw, split on the vertical held on by the four...
For longest life run 32:1!
Mike it has the limited (green) coil on it, Walbro WT-7 carb (no HS adjustment), piston/cylinder look great, new kit in the carb, new fuel line...
one last picture
A friend/customer of mine has decided to sell his 2005 Husqvarna 3120XP. Saw is not a shelf queen but is in very good shape for a 2005. He would...
You are correct 0.36oz of oil to each quart can. It is best to follow the HVA recommendations for the AutoTune found in you saws' manual. If you...
If the pre-mix fuel is Husqvarna fuel @50:1 that is 0.64oz (32/50) oil to the quart, 32:1 would be 1oz (32/32) to the quart you need to add 0.36oz...
Check out a stock Solo 665, 4th place in 4ci stock appearing race! Post #36 in the folloeing thread along with a video....
