[ATTACH] This is what we saw first thing Saturday morning... Bout 9 degrees...
[ATTACH]
When you produce so much sawdust, that the skid steer operator has to drag it all back to keep from tipping over, you know you've got a lot of wood.
So that is around 18 cord in 1 pile.. Add that to the 10 cord delivered to Scott's place and you got 28 cord.. Then there was the piles the Iowa...
We got another charity cut north of Springfield MO this Saturday if anyone is interested in participating..
I'll let Stihl livin fill ya in on how much wood got cut, split, and piled this weekend... It may just be a record... Like a Guinness record......
The only 2 saws I've ever had that backfired, had bad coils... Check for leaks first of course... But that's just an FYI..
The pawl looks like it won't advance far enough to the right to reach the back of the correct tooth, but if you just keep moving it, it'll get...
No.. You must have the pawl index the back of the cutter you are grinding... Or your cutters will rock on you.. I have an NT grinder...
Well, I'd think 20hp might warrant a .404. Hard to say... If you build a Mac like that, we could try it... :D
How many horsepower you figure a built 125 puts out?
On that saw, just find a 7 pin. It'll give you what you're looking for.. .404 will remove some serious material.. Just need more power to do it....
Correct..
How confident are you with the accuracy of the .019 measurement? If you're sure, then it'll be fine.
I couldn't help myself... Lunch was heavy... Had to go cut a load of wood.. It was Locust today..
Everyone enjoy some pie today... I'm fixin to.. BBL
I like chains... And pie...
The saw just needs to be "good enough". The chain you run is many times, the deal maker or breaker..
Yup.. If you clean up the tune, you can get a little more power.. Then after a few cuts, you'll start to lose it.. Everything is a trade off...
FYI... Take the capacitor out, and it's 100% reversible... Thank you Kenneth... I really like this grinder...
