Funny story but my first gas saw was actually going to be a husky and I got it home and "field stripped" it on the dinner table and couldn't get...
Ordered, thanks. I didn't know there was a kit I could just shotgun all the parts at. Easier than debugging which part it is.
You say you aren't attacking me and then immediately call me dumb while ranting about an unrelated thread. You are a bitter angry person. Go crap...
Files of course. What part of the 2-in-1 design do you think justifies no warranty at all? Why is it okay for Stihl to not list this as an...
BTW I was curious what other brands do to keep the clutch housing clear. Here is a shot from an Echo: [IMG] Stihl has the same little round...
None of this angry rambling wall of text actually addresses the points I made. Anyway, Well that is certainly an opinion. Another opinion is...
Yes it's a MS251. Problem with the saw is during the time I've owned it, I've owned and used my Milwaukee M18 saw WAY MORE. That saw has in fact...
Okay which piece on that photo do I have horizontal that should be vertical? Because the saw is 100% operational and running.
Baffled by this comment. What piece? I ended up figuring out my issue. Basically I did everything correct but the problem is you cannot test the...
[IMG] Any ideas on what the problem is with this chain brake preventing it from working? It cannot actuate with the handle. If I use a...
I might buy this. Started the saw up this morning to do a small amount of work. It started right away. And then idled about 50% throttle with the...
Okay this helped a lot. I turned the H, L, and LA all the way in. Then I started the saw. It immediately pegged the throttle so I screwed the LA...
Looks like oem carbs are both available and relatively ($122) cheap so I'll do that if I run out of things to try.
Very helpful advice thanks! I'm gonna go tinker some more here in a bit. BTW I'm nursing the most gnarly injury from that saw right now. The...
Pulled the spark plug and confirmed it has spark. Went ahead and carefully sanded the ground strap and electrode, cleaned with brake cleaner....
I did a couple test cuts yesterday and was pleased with the refinement of it. Saw kinda feels like how a WRX feels to operate, if that analogy...
I ended up getting a new G660 through a series of events. Can't get it to run. Initially it ran long enough t0 do a test cut, but then cut off...
I run Stihl bar oil just cos it's what is on the shelf at Ace. I get this, and I'm definitely in the "pro" category I feel like based on where I...
Noticed the saw bogging down and failing to engage clutch all of a sudden. This was after I'd just cleaned it up and put a fresh chain on. I go...
The sound my Clydesdale makes is worse. Oh and the entire stove insert has to be removed for any maintenance on the bypass linkages.
