I hear ya. Like going up into the BWCA and seeing the millions of cords laying on the ground rotting because of our friggin government...
Any one in northern Minnesota, I can hook you up. Got chit-tons of it at the mine we have to pay to get rid of.
That is when you tell Queen Syphilis. 'Thank you, I will take my money else where." Last spring I went to the fleet farm to order chains. Guy I...
Nice rig. I am jealous. There is a guy here who wants $600 for a similar winch, just the winch, in pizz poor shape. Run a filter on the return...
I wear my helmet and screen shield for all saw work. Even with hearing damage it is advisable to wear hearing protection. Continued exposure to...
Interested to hear your results. I have a 576 autotune that May get massaged once the warranty runs out.
Had the stove room up to 110- ish last night. The dogs were wilting...
I grew up in SE Mich. Detroit does have its bad parts. Belle Isle is not one of them. I can't blame the MDNR for trying to get some work done for...
Yes mostly pulp or chip board some biomass. Over towards the lake where it is warmer there is some verneer. The state of Minnesota has done a...
With a cold start at -50f you have to drive it about ten miles before the transmission warns up enough to shift out of first....
Our 789s burn about 450 gallons in a shift, make 20 hauls of roughly 220 tons each. Round trip from the pit to primary crusher is roughly 15 miles.
It's all 100" logs here for the most part. I ran a truck a couple summers and it took some figuring out but I got it done.
Had another batch of mill liners come in last week at work. All oak pallets & cribbing. Probably four pickup trucks worth. Next mill reline is in...
Ohh yeeeaaaah. Someday I want to have a triple with knuckle boom grapple. A fella can dream...
Finally got mine straightened out and ground some guides with it today. Was nice not having to retool my 311 between tasks. Not a huge fan of the...
Someone else had mentioned SAE ORB fittings. I will toss in a comment that these are what I prefer for hydraulic systems requiring leak free...
Yes it is a pressed in hose barb. Get both surfaces totally oil free. Go git ya some acetone. Use Loctite 680. Apply then insert the barb. Put a...
I free hand file and then power grind when the teeth get rocked or I mess the angles up.
yeah, going straight up is much cheaper in the long run. Your draft will be better too. I only needed two sections of Class A to get 'er done....
Indoors: Usually start with some news paper, add some card board then add wood shop scraps and maul splinters until i have a pretty good fire...
