Here is my 511A set to 55/30/10 (opposite tilt) Chain self feeds very well, allmost overly aggressive, but chain dulls quickly
Here is my 511A set to 55/30/10 (proper tilt) Chain self feeds very well and its cutting edge lasts
Here is my 511A set to 55/30/0 (no tilt) Chain needs decent pressure to feed
I have been using the Oregon pink wheels Stihl is 12mm Oregon is 7/8" (a smidgeon over 22mm) Looking forward to your review Sir !!
Hardest item to procure is the valve. Everything is standard refrigeration tube and fittings except the compression elbow and 1/4" pneumatic...
With a hand file, you can controll the hook. With the grinder, the tilt works with the arm angle and base angle to give the proper hook
Believe it or not, the tilt on the table can make or break a self feeding chain. Try using the tilt @ 10 Degrees with the same other two settings...
Actually, none. The air is coming at an angle to the side and upwards, no matter which direction the wheel spins, I stand off to the side and dont...
I have an Oregon 511A chain grinder that I already made reversable. I have been using the pink wheels and wasnt happy with the heat that they were...
Rather than trying to remember .............. Set the table to zero slant, set up and look at the cutter that you wish to sharpen. The top plate...
I hope you got that guys phone number ................ Fresh wood for easy cutting ! Nice score, and good job getting it out of there quickly !
If you want/need help, please PM me ............ we'll get her going for ya !!!
I like square, but I tend to be overly carefull of hitting anything but wood with it If youre having wood dropped off to you, and its clean, full...
Full skip full chisel round ground chain can be made to cut very well, but it will dull fast if youre cutting driftwood. Here is what a good...
Ralphie Boy hit the nail on the head. If you need a sharp chain, and filing isnt your thing, this will alleviate your problems. I have one, it...
About the only things that I could use would be the drive rollers. I took the Miller gun and hose off my 250, and picked up a 25' Eliminator, so...
DANG !! That PS cleaned up nice ! Thats a real tall side plate, what file did you use ? You stopping there, or going for a "lighter" contender ?
Now youre cooking with heat !!! Nice improvement !!!!
Looking pretty good, except the top needs to be in the corner ............ perfectly in the corner The lower inside corner can be moved to a...
I think that #4 from nstueve is an arctic version ........... heated handles and all
