Be careful. Sometimes they get bigger. [ATTACH] [ATTACH] [ATTACH]
I think the idea is that they are made from sawdust, scrap and other “waste” so the tree wasn’t cut specially for their product. It is certainly a...
If you can limit the airflow they will certainly burn for more than 12 hours, but the heat output would be limited as well. The big question for...
Is that a blended visible/IR shot or is the wood door in the back REALLY hot?
I can’t help with the cat, but for the flue I would suggest a probe style even with single wall pipe. Condar makes two models, one is fairly...
And I thought 3.2 was on the small side!
I would dry brine and inject. If you use a set brine, make sure to leave time to fully dry the bird before frying. Moisture plus hot oil can foam...
You generally want it 18” plus up from the stove top. Installation requires drilling a hole and sticking it in. It is easier with sharp bits and...
This is with an IS? I have zero smoke spill and I even have the smoke flap locked up. My chimney is not tall, maybe a bit over 17 feet from stove...
The head twisted right off of mine before I realized the threads weren’t turning.
BTW, my cat thermometer showed up today. Took WAY too long to install, since I ended up having to drill out the darn screw!
I thought the legs on the rear of the sled went down into a pair of slots. They do, but I now see they don’t go all the way down.
Stoopid question. Does it need to be attached? Could you set the angle iron in the stove so it sits on one side and the vertical side blocks the...
We grabed a tool set from WS when we picked up the IS. The toothless ash rake (and a glove) is perfect for getting ashes through the grate and...
Do any touch up AFTER you install because it is really easy to add more scratches. Once in place, touch up the scratches and do your cure burns...
The paint is soft before you have cured it with a few fires, and it is VERY soft during the first curing burn.
Yes! The 6” in my post was an approximation. The actual cut needed may be more or less and might vary by brand. Never cut based on what you read...
BTW, having a damper does help tame a strong draft on cold days and makes things much more controlable, just don’t forget to open the damper...
You can get just the damper or the damper installed in a short section of stove pipe. Which is easier to install will depend on your setup. With...
After reading both your arguments I think what you’re really looking for is a .50 AE.
