No, he was using gas, no flux core.
We will have to meetup one day. talk chainsaws and such.
:headbang::rofl: :lol::headbang: One day I'll learn to spell (or at least spell check!)
He said it was white oak. Not sure how long this stood dead. It came from Palo Cedro. He was doing storm cleanup on the property and the owner...
That is for sure!
Yeah, just the start. actually cut off the vertical steel part, ground it back to a "V", and then started with beads. He said it should hold,...
220v wire feed
We have some hard wood out here in the West. Was splitting some oak the other day and heard a weird pop. Looked down and seen this... [ATTACH]...
Haven't been able to get out and do much cutting in the last while. Can only work for an hour or two at a time as my hip is jacked up. Did get to...
I bought a Countyline 25 ton splitter earlier this year. Really liked it. Split about 4-5 cords with it and noticed it was eating itself up in...
Have a 266se with intermittent and weak spark. Never tested a two piece ignition before. I know how to ohm test a regular single coil, but don't...
Okay, Ill pass that on to him. That should be easy enough to try and see if that helps.
There was no chatter., The ram moves smoothly to the front and rear. The ram does not move when the control is released.
We had that all apart and all seemed to be working.
The two springs in the pump were intact and working.
We tried adjusting the bypass valve up and down. Only got it to not bog, but still no second stage, or adjusting the valve the other way, just...
WE tried that. Didn't work. But thanks.
A friend bought a used Troy-Built 33 ton splitter. Got it home and couldn't get it to split oak. It acts like the second stage of the pump isn't...
I've burned tons of Bear Mountain pellets over the years and never had a problem with them.
Wow, $2&0/ton here!
