Pretty common on that saw . This will take care of it . Page 2 Technical Information 61.2014 STIH) Technical Information 61.2014 Chain saws...
I think that I’d passon using that machine . I always consider what will it costme if a machine I borrow breaks . So, generally ,I either buywhat...
[ATTACH] [ATTACH] That is your vent tube . One end connects to that fitting just in front of your carb’s fuel line .the other end goes to the fuel...
Try sawagain .com $12.99 pn 501524303 .
Nope,not missing . There is nothing in the partition wall where the manual states there is one . To be honest , even on my sawswith the winter...
My 044 doesn’t have a winter shutter / diverter . It’s mentioned in theowners manual ,but there isn’t one on the saw .
Look at logger chain.com . They have about the best prices on Oregon chain ,and free shipping .
I think you should be good with what you did . I only thinned out mine as it madeit easier to get it to flow all around the tank.
I’ve used it with good results . I thinned it out per the instructions and did two coats .
Yeah , they “ improved “ the site . Makes it harder to use . . . You can also try www.oregonproducts .com . Type in the make and model of the...
I know it’ll work with Dolmar 6400- 7910 . Not sure of the olderdolmars . Go to bailey’s ,and use their bar selector guide . It’ll tell you what...
I rebuilt an 029 with an AM 390p&c . I put a woodland pro 20”nk bar and chain on it ,and it cut quite well . Kind of apples and oranges ,but...
Eyebrows are overrated !
Just an opinion ,and it’s worth what you paid for it . But, of the two saws you own , I’d have the 441 ported . Then maybe get an ESlite ,or...
Yes , default to on ,press and hold for off .
On a separate note , just found this posted on a different site . I don’t know anything about it ,and haven’t seen anything about the U.S. market...
If your switch is the same as the one on thee 6400-7910 ,then it’s the same switch that Husqvarna uses on a lot of their saws . They do tend to...
I’ve only got one Dolmar as dealers are scarce here . It’s a 6400 that I put a 7910 P&C on and had Randy Evans warm up . I usually grab it before...
Why is your chain in there backwards ? Could that be part of the problem?
[ATTACH] [ATTACH] [ATTACH] Waiting on the owner to pick this up . Needed a few parts that were missing ,or stripped out . Kinda heavy for 60cc’s...
