True True. I'll grab the 41cc 011AVT first most of the time.
Just to HAVE a BIG BAD SAW! Just part of Chainsaw Acquisition Disorder. I don't NEED more than a Husky 55 but I'm rebuilding a Husky 272 because...
I've got nothing against clamshells but I sure won't pay over $500 for one. They'll perform fine but be delicate with the plastic chassis. I guess...
That's a lot of money for a clamshell. I'd kick in some more and get a pro saw. Or a good valve in a 50cc class clamshell is PP5020AV - you can...
Oh, I wouldn't sell it. You probably can't get enough for it to put a significant dent in buying a new, bigger saw. (Around here - if you can get...
I buy the AM pickups on ebay in 10 or 20 packs. I like the metal nipple ones - can get tiny .08 x .14 line over them. For bigger 1/8" ID line, the...
With old saws, you need to see if you can get NOS parts or functioning used parts. And they can be pricey. SP70 has points under the flywheel....
Never seen a 42cc Poulan (Craftsman) or smaller with anything but 3/8LoPro. At 46cc+, you'll start seeing .325.
16" or even 14" bar will work. Those are very standard sizes. 3/8 LoPro .o50 A041 mount. Oregon calls them "91". Oregon 91VXL is a good yellow...
PHFSTSHT!!! Drag your feet like Fred Flintstone did...he did fine. LOL
Not sure but the look screams McCulloch. The 41A model # sounds like MTD. And Cub Cadet is under MTD umbrella now. Maybe MTD bought McCulloch...
Good luck in saw rehab. Funny - I can sell one of these Husky 36 to 142 saws for $110 after refurb. 1990-2005 42cc Poulans sell for $65. The...
If the channel is wallowed out, waste no time and recycle it.
160SDEA041 is 3/8 LoPro .050, probably 56 DL. And does it look rough! I dunno if you can dress the rails down enough to get smooth chain flowing....
Sounds strange...bar with no oil ports? Post a pic. I can't imagine running anything but 3/8LP on this saw. Check drive sprocket = could be a...
You could try pulling H L screws and ultrasonic cleaning. These carbs fit a 36 to 142 Husky. If you hit an auction right, you can get one for...
We had a 1990 Model DS Club Car with Yamaha 9hp (I think) engine. Kids used it as their car in the hood. Sat for years when kids went off to...
Clamshell design, 42.5mm MS250 topend should just bolt on, AM parts like carb, coil can be had cheaply. If it's newer and similar to the MS250...
Also, file size can tell chain type...5/32" = 3/8 LP, 7/32" = 3/8. And 3/16" = .325.
Yes, you need 3/8 LoPro. It is much smaller than 3/8. 3/8 won't fit a 3/8 LP sprocket. It is for saws 45cc and smaller. It is easier for the saw...
