She done blowed up! What do you want to do with it David? Keepit a 362 or what? There are a bunch of things you can do!
I have an old friend in FL, who has had PBs for years, nicest dogs around. It is the owner that turns them into problems. None the less, just the...
Slick, Kevin! Wish I would have seen it first. Even the badges are very nice! Congratulations!
Anyone who wants to do a quality job without a bunch of extra mashing of teeth, needs them.
What do ya think it weighs?
Anyone know what is up with Seven? Is he OK? UPS has made two attempts to deliver the NOS 288 without success. IINM they will try one more time...
Sorry, Roger the saw is sold.
Well, I do the MM on mine, I put them in the wife's oven!! For real I do!
HVA says heat the case to 200°C, freeze the bearings, they drop right into the case, no force necessary. 200°C (394°F) sounds like a lot but it...
The mfgrs spend a lot of time and money developing these tools and methods because they value the results of doing it correctly.
No chit, Red Rider, said Little Beaver! The 'other ways' lead to less than the factory desires.
I think I have three or four of them. They really work well, are very controllable and quick to use, without any messing about to get the...
In the attached .pdf along with all the other factory tools.
Adam, if you look closely at pic1 you will see that the mandrel is stepped, the entire inner surface rests against the bearing, preventing any pre...
Adam, the only place in a husky manual I've seen any hint of that is on clamshell saws, never on a pro-built saw. Mike the one I was using in the...
Husqvarna provides several of these tools for different familys of saws, they are all basically the same tool with different threads and sizes for...
Not only is the inner race to crank fit a little on the loose side but the bearing to case fit is not that of a Husqvarna. In the case of the...
Kevin, did not some folks building race saws resort to welding the cranks?
Nice picture, if I'm not mistaken, it looks like the crank has also twisted, the leading edge of the counter weight on the right appears to be...
51.4mm cylinder castings say W6+++ IIRC.
