[IMG][IMG][IMG]Idle[IMG]Full bore[IMG] 4ftx4ftx1/4"water jacket 38" dia firebox 40" deep 3/8" holds just over 300gallons of water. Any questions?...
[IMG][IMG][IMG][IMG][IMG]
[IMG][IMG][IMG][IMG][IMG][IMG]
Hello, fellas this was my first attempt at a owb. Well this is what got me into these chainsaw things. Now before you rip me a new one. I was...
Thank you, stayed in the shadows for a bit, then was convinced to join. Figured no better way than to start a build thread. Yeh cotton wood,...
[MEDIA] Switched to full comp 3/8 and that is a nasty hard maple crotch the tip was just poking out the other side. Just to see what it would...
[MEDIA] Full size 3/8 :D Even oiled it well.... 32" skip
[MEDIA] 20" 3/8×7 [MEDIA] Same bar/chain. While not the fastest setup, I was mighty impressed with how it pulled it. Seems the more fuel I...
[IMG] Better pic of how I mounted the a/f cover. [IMG] Carb on the left is the one I opened up. [IMG] Old and new choke plate. [IMG] Stock...
[IMG] Made these gizmos for the choke linkage. [IMG] These carbs have a long choke rod, with the plate peened into position.[IMG] Something...
[IMG] Started on some carb mods.... [IMG] Venturi opened from 14.25 to 15.6, stock carb has 13.5. Choke bore opened from 16mm, to 18mm same as...
[IMG] Modified a Picco rim to fit this thing. [IMG] Added some oil holes to a 18" lo pro poulan bar [MEDIA] Same log as all the other clips....
[IMG] Modified the air filter setup. Kind of a hot rod look lol. [MEDIA] Set at 12,900 3/8×7 16"
Part 2 [IMG] Roughed up the intake, widening it and raising it back to stock location.[IMG] Glueed the jug on via permatex 51813. [IMG] Added a...
[IMG] Why echo? 300$ with 18" .325 bar, chain. One of the lightest 50cc saws around, even come with a small spline rim setup.[IMG] Decent comp...
