Thank you This dolmar has a Short skirt piston. Free port is when the piston is at top dead center, and the skirt dosent completely cover the...
Idea was to keep the heat inside the fire box. Works a little too well, hence the creosote issue. Avg stack temp was in the 400* range during a...
Baby saw, baby food lol
Open the oil holes up, like 1/8" drill. The total bars have very small oil holes. Lay the factory/known good bar over the total on the bench, the...
[MEDIA] Ported same bar/chain the log was a bit bigger by the time I shot this vid, the saw didn't gain a lot of speed, as the coil was holding...
[IMG] Just took the gills out of the muffler and opened the stock deflector a bit. [IMG] Comp after porting.
[IMG] Transfers raised and reshaped. The exhaust side (right) opens 2* before the other pair.
[IMG] Raised the ex up a bit past stock. [IMG] Ex finished [IMG] Squared and raised the intake.
[IMG] Coil mounted on jug, kind of odd. [IMG] Stock comp, saw had like 2 tanks through when I got it. [IMG] Cut the base, .035 witch is just a...
[IMG] [MEDIA] Stock other than the cat removed from the muffler, setup with a 18" 3/8 lo pro chain.
Sounds like a plan, hopefully in the next couple weeks or so. For the right price you could have this one :)
I have thought about lining it to the ash line, just never got around to it. I know I should have just bought the foam filled lines, but it wasn't...
Thank you, The fire box is not lined. I have a solinoid to open the damper, controlled by a ranco aquastat 170 on 185 off Only have a 60ft run,...
I do not have that baseline sorry. Always do the muffler mod last. I will try and get the 421 thread over here today.
No j red saws, but do have a few farmall/IH tractors.
If anyone has questions, feel free to ask. Hopefully this fall I will be able to start working on version 2.0, have a few different thinks I want...
[IMG] Christening of the dump trailer. [IMG] Went and got a load for the old man while he was under the weather. [IMG] First load of wood for my...
Thank you. Figure the more pics I post, the less I have to type :)
Not heating the hot water, just the house and barn (kind of). Pumps through the barn 24/7 but only turn the fan on when I'm working. Best I can...
