Got a stock one to bring along too. Just to see how much I slowed this one down :)
Found my spark checker... no spark cause the kill switch was on lol Did a carb kit, think I knocked out a check valve in the brass main jet....
Got all the parts to hopefully get it all fixed up. Should have a stock 590 here soon to compare.
Those mod well too... Just got to find a 7910 top end lol
[IMG] Ex set at 104 [IMG] Transfers at 124 [IMG] Intake at 81. I widened both the exhast and intake just a bit. [IMG] Progress... [IMG] All...
Transfers set at 120 [IMG] Jug all sealed. Installed a new walbro 198 carb, didnt really care for the zama. [IMG] Hacked up the 359 muffler,...
[IMG] Got this saw on trade, pretty clean overall. Oem 359 was pristine, but already purchased a oem 357 cylinder kit. I have heard the larger...
Totally different design. Believe me I Tryed lol
Little update, This saw will be getting an unlimited 620 coil. Maybe some carb mods. Will be getting back into the swing soon. I can't do any...
Thank you, Still gotta get over that way and let you fondle it. Ma not be the fastest 50cc but I don't think I have held a lighter more use able...
[MEDIA] What's not to like about a ported 50cc firewood saw?
Other than building a true gassifier not sure how one would go about trying to burn the wood gas at the top of the burn chamber. For the next go...
Thank you, I am in leslie (small town) between lansing, and jackson just off 127.
[IMG] Cut the bases of a couple cylinders. Hopefully tomorrow I can get one of the saws done.
Slightly off topic, but where can I find pic of the "linked xj"? Now the warm weather is here I have an itch to start working on my tracker/truggy...
[IMG] Split the case today, new bearings, seals, oil hose, gasket. [IMG] Back together, the cases had a steel race to hold the bearing, so...
[IMG] Very uncoventional transfers in this saw. [IMG] Small squish band and it is cut on an angle to match the dome on the piston.
[IMG] [IMG] Anybody interested on a build thread of this saw? This will actually be a "build along" thread since it isn't quite done yet.
The had thing with saws, it pretty much none of the 2 stroke info published crosses over. Lots of ideas but only way to tell is actually try...
Never seen epoxy in an exhaust port (heat). Most of the time epoxy is used to fill the intake port. I have only ported 5/6 saws. This is my...
