I installed one for my stove as we had the same exact experience as you. Basement install, with an exterior class A 22 feet straight up the side...
Maybe someday I'll get over there... It's quite the trip to make, maybe I'll plan a vacation on the East coast for the family and I'll scoot by...
I use a magnet to hold my cat probe in place. it has a hole through the middle of it to allow the probe through it. Works great. I think a magnet...
I bought my stove in October of 2015. My stove has the 1/4" hole on the bottom of the door opening. I heard it's an EPA air intake hole.... What...
Its crazy how the cat is 1200 to 1300 degrees yet the stove top is 400 to 500. I don't have a flue probe on my pipe. Its double wall and I'm...
The air was turned way down, with no secondaries. All the lights were off, and no flash on the camera. It was glowing bright and was visible from...
Here's a couple photos I took March of 2018. The cat probe temp was right at 1300. Glow cat glow....!!! [ATTACH] [ATTACH]
When my stove was new the cat would glow like that. The cat probe would be in the 1200 to 1300 degree mark.
The cottonwood rounds you guys are posting seem like different wood than what I deal with in Nevada. Our cottonwood is always large stringy wood...
Here's the rake I use. Works okay, but not as well as I thought at separating larger coals from the ash.[ATTACH]
Those are all split except the very big one which I turned into a splitting block for the lodgepole I got. I halved most of the rounds to make...
[ATTACH] When it was green and huge (36" rounds) it was very stringy and wouldn't split apart. Even 16 months later some of the larger rounds...
I have a cord of cottonwood that I got 18 months ago from Chip drop. It was all 24 to 36 inch rounds that I had to cut into shorter rounds and...
Beautiful... What year and month did you purchase your stove?
I really like this and it seems like a very reasonable response to the issue. Like Brian said, Woodstock doesn't have to do anything to remedy the...
I have 2 "original" Eco fans on my ID. I guess they work but one has the rattle... Maybe next fire up I'll take them off and see if there's a...
Here is a picture of the "line" I was referring to in the earlier post. Looks consistent with where the cracks are occurring. Is this from welds...
What month and year are the affected stove made, purchased? Like different "job" numbers for vehicles maybe there's a specific time frame where an...
Yes it does, and it looks like the cracks are starting at the top of a piece of angle steel inside the stove. I can see a line (no crack or...
I looked at mine. No crack so I'll keep an eye on it for sure... Please keep us posted so we can know if there is a way to avoid it, if possible....
