I've always heard guys refer to "normal" chain as full house. Now I know different and thanks for the correction. The grinder does come in handy...
With one of those worthless diamonds no less! :D
For what it is worth, here is what I've found. I run full house chain on all my saws even on the 3 and 4 ft bars. I made up a raker grinder that...
That is why we always cut where it falls. We helped a guy cut up wood that had been put into pile by a dozer. he had a deadline before it was set...
They did honor their word. It was worth it to them to have a corner on the market in our area. LOL I didn't know that Hypertherm made welders. I...
[img] I then marked, cut and drill for the zerks and brass lock down. [img] This will help to keep it in position and allow the grease to get...
[img] Weather got worse as we had some ice on top of the snow so I decided to go ahead and take the slop out of the swing mast before even try...
I have a Miller 250x and Syncrowave 250. Both bought new as around here used machines normally go for close to the same price and you get no...
I'm still learning with TIG and need a lot more practice. Real comfortable with MIG but I probably have a lot of bad habits with TIG. Eyes aren't...
[img] Put it all back on and really like how it works now. Looks better too! [img] Haven't tried the coat hanger yet. LOL [img] I used a...
[img] I trace the curve from the pattern and grind most of it out. I finish the curve on the roll wheel of the belt sander. Want these tight as...
I had ordered that first one you listed a few days ago. :yes: Hasn't arrived yet. I figured I try to get it to work with my first winch as it had...
[img] On the other side of the piece I recessed it. Went just about the thickness of the bolt head. I'll TIG weld this on as well. [img] I also...
[img] I'll weld this to the big round but I have to drill the hole for the threaded collar. I'll do a press fit hole. [img] Pressed it in and...
[img] Used a prior made thread holding jig and ground a 1/2 inch bolts end to perfectly flat. [img] This way it won't dig into the brass. I'll...
[img] Did the math and ground one side till I was equally centered with the flat. [img] Used the chuck as a surface plate and squared the flat...
[img] They are about 1 inch wide so I cut them to the correct length and pushed them in for a test fit and work great. Warmed them on the stove...
I grind for a living and the slop on the hole to the spindle hub is there for a reason. If it is tight on the arbor it can cause it to become too...
[img] Don't know if this was made from a solid hunk or they welded the ears on and turned them smooth. I'm leaning toward a solid hunk though in...
[img] Next issue was the boom lock. I figured this would fail. The swivel boom was bought and the lock is pretty weak and poorly made. Lets see...
