Before I throw out the numbers to far I'm hoping fordf150 jumps in here. These saws flat run outta carb. To go any further they would need an...
Yes saws turned out really nice imo! Light and fun to run now. As I worked my way threw the recipe I settled 108 exhaust with around 15 degrees...
Dont be the same as everyone else. Hunt ya down a 2165 instead. :) . Or at least I wanted one with the closed port top end to try my hand at a...
I'll be back to discuss this build later but here's some eye candy till than. Some of you may now this wood. Ain't nothing that will kill a saws...
A tac is nice for setting the idle and checking rpm in the cut but High tuning should be dome by ear! Loose the tac. When your MM is all done...
I havnt but it would be worse than a screen at plugging up. I think. Lol. And a pain if it does.
It's just header paint. I heat the Mufflers up before painting. Randy/Jeremy trick. But one of these days they sell the high heat powder coat...
Sorry for the long ramblings but any MM saw gets loud. And I'm one that if I can make it quite and still have the same performance I'm all about...
What they look like finished! :)[ATTACH][ATTACH]
Here's pocs of the first 562xp I did. But maybe it'll help explain. When gutted these are a straight shot and loud. By adding the pipe angled...
A good example of this is the 550xp and 562xp. When I mod these I actually bend a peice if steel. 3 side face the open towards the from of the...
Op I would listen to Nike lee on this. If you remove the plate on this it's gonna be a straight shot from inlet to outlet. It will be ear piercing...
Once you get that baby all muffler modded don't sweat it. You'll be able to hear the four stroking easy. Holar if you need some help!
If nothing else it'll make you love your echos even more! :dex:
Good job guys. You the man mike!
Hi Mike! :)
Porting 101 Start by reading this! Get an idea of what going down before we proceed! All these boys will help you get this saw up and going maybe...
The Blue coil is a limited coil, black is unlimited. You'll want the black. As far as the porting goes. I'll help you out the best I can this...
More tweaks. But they will take me awhile. I have 2 of these to build and they'll both probably come apart a couple times trying to get a base...
On these the crown of the piston I'd only 2.5 mm thick so it would be to thin to flat top it. I think for a woods port build the stock parts need...
