Colder now, just lost some smaller branches and the power somehow stayed on. So came out without any damage or extra work on Thanksgiving.[emoji106]
Will do. Looks like the they're saying gusts of 55 now, so a little higher, hope this isn't a trend the next few hours.
The West side only about a half mile from the river. I've actually been to Rabbit Hash few times, been in the general store before burnt...
Looks like some good wind gusts are indeed on the way to SW Ohio. I actually lost power last week when we had a front move through.[emoji17]
Makes good kindling. Other than that it's not worth much.
Bit of a long drive for me.[emoji1] Cottonwood? It burns like paper, but it does burn non the less.
Of course, I'll never let that one go.
Won't make a difference. What can happen is the ends of the logs often get dirt on them from sitting and being moved around, that will dull a...
So it looks like it's do out in about two years, so lot's of room for improvement.
I personally think it looks hideous.[emoji111]
Not odd at all, lots of manufacturers use different DL counts especially if you're into older saws. Having the same DL count from one manufacturer...
The factory 20" bar on the cs590 uses a 70 DL chain. Stihl and Husqvarna use 72 on what they call a 20" bar.
This is what I was thinking, guys that don't like noodling have saws that are much too small for the job. I wouldn't want to do much of any...
I much prefer noodling, but you do need a good saw. IMHO using a sledge and wedge is a pain and too time consuming. Usually if you go 75% of the...
The good thing about wood burning, CO will almost always come with smoke and the associated smell. A bad heat exchanger or improperly vented hot...
The digital readout will only start reading at 25ppm after 30 days or 50ppm after 8 hours, it's not a real time readout. Low level detectors are...
Understand the home detectors are only for extreme amounts of CO and often over long periods of time, they really almost don't work. When tested...
I too find it easier to just cut logs that large into smaller pieces. If I had a loader and a $10,000 splitter I would maybe think differently,...
Yeah not much of any hinge/holding wood that I can see. The face was about the correct depth, maybe a hair deep if it was leaning back, but...
That's what can get a guy squished in a hurry. It appears the back cut is very angled, and the hinge looks completely severed. No hinge no...
