It's just splitter trash. It happens. Does their process remove it from the product? Apparently not. The more mechanized the processing the more...
Was there a red tape reason that they can't get a guy to weld on the flanges, or cut gaskets, to support their current stove owners?
I used foam board. 20 psi stuff is stronger than the compacted gravel beneath it. Of course there is 6 mil plastic beneath the foam as well. The...
My last two slabs were insulated with 2" foam underneath and on the sides. They stay nice and warm. Foam is cheap and works. Yes, the insulated...
that’s a very good clone of a very good engine. If it was surging, not holding a steady hertz, it is because the carburetor was gunked up. Any...
I'm not sure I understand most of that post but here's another quick quip for you, you can totally get the right answer using amps instead of...
The electrician probably did the right thing. The panel isn't divided in half left to right. Every other slot is on the same leg of 120. That's...
I’m saying the reason your generator couldn’t run your tool has nothing to do with whether you used watts or amps. Also nothing to do with planes...
Watts to amps is just math. 3500 watts at 120 volts is 29.2 amps. If a device plugs into a 20 amp outlet then a 3500 watt generator will run it...
I had probably the same 3500 champion for years. It's a great open frame non-inverter genset. Thing is it's 3500 watt peak output and it's a...
Turns out, since the bricks cover the metal from smoke exposure no creo accumulates behind the bricks so no need to pull them. I pulled the bricks...
Much too early to think about shutdown. Still have three months to go! One thing I see missed is that before summer shutdown I burn some short...
I would also put it before the baro. You know that temps after the baro will always be lower. Sometimes much lower if the baro is more open due to...
Or just move to western washington. Pouring down rain and 50 degrees outside. And dark, and muddy, mossy, and full of wackos. We do not have low...
I only charge less than 6000$ to hook a house to sewer. That's from the city. Then some contractor runs the actual pipe. Prices on sewer hookup...
860 is at the upper end of the normal temperature range at the standard 18" above the stove. Class A is rated for 1000 continuously. My auber...
I expect a lower intake setting to get the same flue temp despite the higher draft. In my mind, that would be like forming your lips into a...
I agree. That lets the intake air blast harder against the glass for a more effective air wash.
Relax, nobody is "tearing him down", I'm sorry you feel that way but everybody here wants Woodstock to succeed. Whether or not a person owns a...
I suppose size is relative. The biggest stove is 2.5 cubic feet so that is solidly medium for some people. Should burn overnight no problem. I...
