Yes, you're right 3 screws in every joint!! Unless, (with regular ductwork), it is between joist spaces, then you can only get 2 in at about the...
Depending on where you live (New Hampshire, I see) there could be codes and there may not be any. I know here in South Dakota, there is almost no...
Looks like the piping wasn't put together properly, black chimney pipe is the same as residential duct work (hvac tech ,here). Round duct has 1.5...
Yep, it missed them
[ATTACH] [ATTACH] It's the fitting between the actuator and the ram....
I thought you meant Mansfield South Dakota..... I was going to say...."there's nothing in Mansfield..." It's just about 40 houses, a post office...
Part is on order for my splitter!
Newspaper ( I know, I know) but I use the long BBQ lighters, and pines/spruces. Hot quick fires to get her started
My small town of about 150 people is located about 4 miles south of the ND/SD Stateline, along SD highway 37. It runs north and south through the...
No no no, you bring your Oak here.... As Oak is almost nonexistent around here
Whoops again, 1 one those is a 7x5 and the other is a 5x7......some of you may have seen that mistake.
Whoops! Didn't mean to double post my pics
Now, I didnt shoot either one of these. They are just decorations in my house!!! 7x5, or 12 point depending on what part of the country you come...
Trees actually aren't supposed to be out here where I live. This is grassland prairie out here. If you drive around out here ,all the trees are...
Thanks guys! I've learned so much since I created an account here
Basically my question is, does a dead standing tree (long dead) need to season at all or should it be ready once CSS?
Ok, so talking about my splitter, I want to buy some new tires for it. They are the small typical tires and rims, but there is one of them that...
I need to come up with something like that
There was no way any of us were picking that thing up, that weighed probably about 180-200lbs. It was still sopping wet.......and about 30 inches...
Too late, it's in the shed. Cut it in half, with my saw close to the wedge
