Wow are those parts clean .. 150 PSI? Did you use a base gasket?
I'm liking this! Especially the CLEAN work area.
I use a large industrial yellow crayon ... from the local hardware store.
I found mine on eBay ... about $13 shipped for the whole shebang. If you're handy with a welder, you can make one with a piece of pipe, a nut and...
Cus, I can't be there .. the timing isn't real good for our schedule around here .. :(
I like 'adjusting' DDs myself!
... and here I was expecting a dead possum.
Wow. I'd cry too ...
I've had a couple both in Dolmar and Makita colors. Very impressive little runners! That one is very clean .... I'd put it in the $110 - $120...
Gottum one here, too ... [IMG]
The far and away #1 thing a newbie can do to help themselves is to research a topic before posting a question.
IMHO, a non-runner would be about $55 .... runner $115. This would presume that it needs nothing more than a general clean up and chain sharpening.
Ya know, the presence of that 'black box' has me convinced that's not a 'normal' USB cable in any way.
If you're married to the idea of getting a *new* machine, then so be it. IME, my money goes farther and buys a better unit if I go the *used*...
Condensed moisture from the excess air volume trapped in the container.
I'm a tall guy and I hate this style of splitter. I'm thinking of a vertical splitter ..... using a table 40" off the ground. Slide the rounds...
I have been looking at a shop lighting upgrade myself. Not scared to 'engineer' my own from foreign components ... The BBS offerings here right...
Ok ... took a look at the Oregon info ... When using these comparisons, keep in my that the 61 must be before serial number 0510572. Drum 102469...
Yup, that saw is a re-branded Poulan. The bar is a re-branded Oregon Intenz bar I believe.
www.loggerchain.com will do chains 'by link' at a good price.
