404 is great chain if you have a big enough motor, the problem with it is it will not bore with a 11 tooth sprocket so if you do a lot of boring...
Are you saying a mm saw is the only saw you can test your chain with
I have a ehp 7900 and a Ecsaws 562 that are not going anywhere.
It will be more awesome then the awesome ms362
Wait till it breaks in!!!
A 5105 will weigh about about 3/4 lb more then a 550 and about 1 lb less then a 310. The diff in cutting speed between a 5105 and a 550 is only...
It is defiantly worth more then a new 290 farm boss
Here is rev boost.[MEDIA]. Have fun with your new saw.
[ATTACH] I owned a 3120 for over 20 years, sold it just this year.I have also used 084's a good bit.Both are great saws.[ATTACH]
If you have a Dolmar dealer near by check them out,just as good as Stihl or Husky but a lot less money.
This one may still be available for around $650 or $700[ATTACH][ATTACH]. Central Ohio
The ehp 7900 best time was 2.1 sec with 18" bar and round chisel.Ed did a real nice job on this saw
I also think that the ps is easier to get good consistent times with and I also like the way it works for limbing better.I also cut down a few...
I did a little testing with ps and 3/8 on my 550.Brand new the ps was faster then the 3/8 but when I hand filed both the 3/8 got faster and the ps...
My wife
I have one more trick to try and I will tell you what it is.I decided to start using square chisel like all you other guys
I've got to hand it to Dex, he is one clever fellow. He started this fire and when he saw which way the smoke was blowing he park the cant trailer...
I think your chain took about 3 to 4 sec off of Dex's best time in the big cant.I could be wrong though.Dex might know
I had a great time thanks to everyone there and a super thank you to the host and hostess.
Just got home,Time to sharpen some chains.
