If you get it, reach out to Woodstock and I bet they'd let you know if the leg can be fixed or not. They're top notch with their customer service.
Here's a photo with a 24" aluminum level up against the area where the door gasket seals. The steel isn't flush and dips into the stove body an...
I have an OAK on my Ideal Steel. It used to backpuff and spill smoke bad, especially since it's down in the daylight basement portion of our...
I took a 1/2" washer and put it between the larger flat washer and the handle. Tightened up the door and looks to have sealed the gasket back up...
I believe several other owners have had their stoves repaired and returned over the last few years. I haven't placed a level on the face of the...
Good morning. I got my Ideal Steel back last week and placed it back on the hearth on Saturday. I put all the parts back on as I was instructed...
I remove the floor of firebrick but don't move the soapstone liner on the sides and back. A shop vac can get 98% of the ash out from around the...
I had to move mine a few weeks ago. Actually sent it back to Woodstock for a repair. If you can find a "narrow" pallet jack put 2, 4x4s between...
My stove is in Harrisburg, PA according to the tracking update. It said it should have been delivered today but they haven't updated the tracking...
Yep, we ran the straps over some dense foam to keep the straps off the steel to avoid cutting.
I did four straps, two east/ west and two north/ south. I also built a 2x4 three level platform around the legs locking them together and ran the...
Got it done. Took three hours total to strengthen an existing pallet I had, move the stove out through the daylight basement and up to the...
Yes, I've been in communication with them and they are going to take care of the crack just like they have been doing for the others. Just have to...
Well, I'm going to try and move the Ideal Steel out tomorrow... I am going to rent a 20.5" wide pallet jack, go straight under the belly of the...
:popcorn: I'm curious about this topic too... I have a daylight basement with 8" block walls with no insulation and have wondered how I could...
Just because I'm curious and nosy, and word on your chimney....? :popcorn:
Right!!? Bad mouth everyone and walk away.... really helpful and productive... Isn't part of the reason for a forum like this is; one, ask...
SD Steve , what type of insulation do you have around the chimney thimble there? I have cinder block wall around mine in a daylight basement and...
Definitely replace the whole chimney with new Class A pipe. The first photo looks like it had some type of failure (water corrosion or hot hot...
Thanks for the update. I was curious about the shipping as I live 2800 miles from the Woodstock factory. To ship it to the factory and back I'm...
