462 or wait and check out the new ms 400.If you don’t mind the extra weight or cost go 462 or 500i
For what you’re doing you should look at a Ventrac
Best way but a big saw sure helps.I even roll them a qtr turn and do a cut.Fastest way I’ve found to make them manageable.
The only good thing about a 290 was the $370 price but you could buy a Dolmar 5100 for $385 that weighed way less and cut 2 times faster and way...
A lot of people are thrilled with a stock 290 farm boss simply because it says Stihl on the side and they have never run a good pro saw so they...
Don’t waste your money porting a 290!
Stihl have the best tips period.Tsumara tips won’t hold up if you cut with your tip a lot but are fine if you don’t.
Your chain is very dull
If you had to pay your men $15 each and the use of your truck and trailer should be worth an easy $40 to $50 per hour.You have your time and fuel...
Jeff my 1996 New Holland skid steer uses 10w30 in engine and hydraulics
Jason your chain is dull and not from cutting wood but from cutting dirt either dirt from hitting the ground or dirt in the bark,in clean wood you...
Break it in and get a woods port on it
When the saw starts to plug change the angle of the saw.Raise the back of the saw up and it will help clear it
I have a Polaris 900 ranger that comes in real handy around the farm but the Kubota is even better because of the hydro dump and weight capacity...
I have seen just the opposite
I wouldn’t even look at 50cc,go to 60cc and you can be under $600 with some and a little over with others.I would tell you to go to 70cc but they...
Cottonwood
Dave thanks again,I had a great time.Your one top notch guy.
Here’s the deal,if you want to make a decent hourly wage selling firewood you would be smart to have a super split and a 70 cc saw.Forget...
I have split a bunch of elm including wood like in the photo,the kinetic doesn’t like it but will split it but a hydraulic doesn’t like it either
