Oof. Already ordered from Earth Sense. Have to hope they have taken care of that issue. So, if the polarity is reversed, is that a danger to the...
Heatilator Eco-Choice 14" Thermocouple + Cover, 812-4470 Found one for less, and includes the cover (Other site wanted $15 for that) Free...
So this happened again this morning. Stove was running on low and i turned it up this morning to medium. It ran and heated up until i heard that...
Hello, all. Just dropped in to find out what Helga's control box was trying to tell me. Very sorry to read of Dexterday's passing. : (
Trusty FHC site comes through again. Just had this issue on our Heatilator PS50. Thought i might have to order a part and run the oil beast while...
Hello pellet heads! Just did the yearly glass cleaning and thought i'd drop in and say hi. :D Helga the heatilator is going strong as we enter...
Thank you, imacman. So am i correct in thinking that you just then use the power plug as the on off switch?
Hello, pelletheads. It's been a very long time since i was here. PS50 still going strong. Hope you are all well. I do have a question though, in...
It's ok if it's clear, artc
I was out doing stuff for herewhen this all happened. Her gift is she has no errands to run now. <3
OK, i think i also figured out why my wife thought the stove had stopped. This low draft kit allows me to have the feed gate closed as far as it...
I inspected it when i installed it. One i had before did have bent impeller blades. These were nice and even. They all have a little cant to them,...
Aha! when my ear is below the motor's cooling blades, i don't hear the whine. when i move my ear into the same plane or above the spinning cooling...
Ugh. it still makes the noise on medium. This vid without the rooom fan blowing. The "other" noise is the feeder motor. I did notice this motor...
Thanks for putting up with me, fellas. Actually, it appears hooking it to the motor frame has taken the noise away. Glad i asked. Not sure why i...
Yeah, this one is long though. Not already connected to motor frame when unboxed. I moved it from the sheet metal stove wall to the motor housing...
OK. Red circle is where ground wire is now, Yellow arrows point to nuts where i would hook it to the motor frame. (one of those. The nearer one...
Ground at wall is verified. The wire to stove fram is from comb motor. secured with bolt & washer. But i did have the last one hooked to the...
I cleaned the flue very recently, and the motors were just swapped out, so that passage is also verified clear. The air flow is good with the 1.75...
Ok, folks... Three position swithh on the heatilator PS50 (cb 1200 motors etc...) New motor low draft 1.75 amp. It is making a buzzing sound on...
