LOL - Not too bad. I never run more than a couple or three tanks to fill up my truck. The XL-76/130 series are pretty smooth, all things...
[ATTACH] [ATTACH] [ATTACH]
Front and rear of the canopy on my '92 Yota are Plexi now. Too many steep and rough roads. I have custom cut pieces of door skin that I slide...
Made a couple trips to pick up a fresh windfall. Loada the Yota x 2. Ran a couple of Homelites that I was working on. 2.5 cube XL-1 was all in...
I managed to go through a foursome of saws the past couple of days. All running well now. I cobbled together a "West Coast" spike for one of my...
Couldn't get out into the hills, so I chucked the 77 into some rounds in the front yard. Pretty smooth cutting. Plenty of mid-paced grunt for a...
I am going to stuff it in a couple more rounds next weekend at a get a clip of it running. Spun a new loop of JGX for it today. Found a nice 22"...
Looks like a nice find. I've had good luck getting those 3-hole Homelite clutches off using a couple of oversized allen keys ground down to just...
Yard sale pick up recently. 4 Saws on the thrift. Cleaned up 3 and did the usual to get them running well. Super 2 ran when last put away...
Went and grabbed a load of rounds from my stash. They've (Doug Fir) been sitting since last May. Split up fairly well. Good to go next, next,...
Dad's old Echo. I haven't run it in a few years. I need to pull it down to get to the manual/auto oiler. Sucking some air. I'll change all the...
Gave an 026 260 mix-'n-match a workout the other day. Rebuilt it a couple years ago, but it hasn't seen any real action yet. Needs a few more...
Found some finished pics of the early, manual oiler, smaller piston/cylinder xl-1. Converted to a super mini. The case accepted the larger pilot...
Nice pick up. I am curious if that is one of the earliest models. I have one that had the smaller 1 1/2" bore cylinder with the L-shaped single...
When I started into this hobby, I couldn't afford a new power saw at the prices they wanted for pro models. Being a firewood hound, I wanted to...
I fancy rebuilding/running the old ones. Partial to the 70's. [MEDIA]
I crawl into some rough/steep areas to get the good stuff. Makes for a slow trips out if I want to keep it all together. Front and rear on the...
Blew through some today. [ATTACH]
[ATTACH]
Lots of parts from a husqvarna 61 will swap if you are looking to keep it the same displacement and your jug is sound. Flywheel, crank, piston,...
