I have a few pairs of these from HF, good price and seem to hold up fairly well. http://www.harborfreight.com/split-leather-work-glove-66610.html...
Saw this on CL, guy was asking $75, said it was not working. Got it for $65, figured I could fix it. Turns out one of the two handles was broken...
Made a new chopping block today, the old one was all rotten and had ants in it.:eek: This time I made it with 2x6 PT and 3/4 PT plywood, that...
The scoops are coming!! [MEDIA] Welcome to the future.
Happened to see this posted this morning, wasn't that seriously looking but could not turn this down. Was the first person that was able to show...
I pick up twigs and sticks in the yard and use pallets split into small pieces for kindling. For fire starters I use these, you can often find...
I have one of the older models, it is 28" long. If the wood is reasonably straight it works great. For the tougher stuff I have a7# mall with a...
Here are some ... interesting stoves. [ATTACH] [ATTACH] [ATTACH]
Nice little drill press, I have two older drill presses, a bench top Rockwell delta and floor Buffalo. The Buffalo was a mess when I got it, ( a...
Put too much weight in a small pick up ( Ford Ranger) and yes you will be replacing these... [ATTACH]
Well yes, This is my automatic air controller, it uses a temp controller and timer to actuate a HVAC damper actuator. It works quite well but is...
I picked up this snow blower about 8 years ago from Ebay for $25. Basically in good shape but needed a little TLC. Hahn Snow Giant made in the...
I don't think a snap disc would work very well, they are not all that accurate, not adjustable and do not give a visual indication of temp....
Yes, I do. I have digital temp alarms for the stove top and flue temp. The ones I have are built from off the shelf parts, they are similar to the...
I just clean the ashes like this, scoop the ashes into the pan, have another pan, slightly larger that fits over the top, take them outside, done....
Easy: 1. How much did you make_______. 2. Send it all in. :(
[MEDIA] This should answer you question.:eek:
Very nice work. Here is the one I made, I used PT lumber as the first one rotted and fell apart. It works quite well, probably a bit too heavy to...
Once again...those inexorable Darwinian forces, strike again.:eek:
Never heard of that before, gives new meaning to "getting hammered".
