Thanks for the info, I'll have to try that out at at slow speed to verify again. Thought I tried it a long time ago and it dropped me into a...
Yep, no air bubbles coming from the bleeders. Took it on a test drive, and it stopped fine. The traction control system was not happy when I put...
Pedal is solid, and I made sure the reservoir didn't run low so I *think* I'm good but I just want to make sure via bleeding with the pedal...
Think you are spot on. Noticed yesterday that when I would barely crack the bleeder there would be very few bubbles. When I opened up the bleeder...
Automatic. It does have manual mode, but I'm not sure what gear it puts it in if you drop it from drive to manual, I wasn't interested in finding...
Clean / clear fluid is coming out of the bleeders now on all four corners. I'll get the all of the air out via pedal method and call it good....
Got all of the old fluid pulled out of the reservoir, and new fluid running through the bleeder / caliper on all four corners. Seeming some air...
What generator not to buy if you want clean power. The frequency was jumping from 61ishHz all the way up to 64Hz. Plugged an old school...
That's the route I'm heavily leaning towards. Thanks for the explanation Highbeam and Gearclash
I'll get some pictures later of the generator. It was an el cheapo Champion open frame RV generator from TSC when I bought it 10+ years ago. You...
o_O This is the size genny I'm currently looking at. Is it an inverter genny? At hunting camp in TX we run a 6K Honda inverter genny in eco mode...
Being a little dramatic, it ran it, but it definitely didn't sound good, so I turned the microwave off. When the instapot was cycling off and on,...
Out of curiosity, how much did you spend on gas? We were recently out for 42 hours, and I spent roughly $20 on gas for my 3500-watt non-inverter...
Zwave control of water recirculation pump : r/homeautomation Get a ZWave (preferred over Chinese Wi-Fi receptacles) outlet, and a motion sensor....
That's pretty sweet, I'll have to look into one of those. Thanks for info.
Out of curiosity, what's the plate for on the zero turn that's covering up the exit chute?
Unfortunately, the top video seems like a commercial for the manufacturer that sponsored the video, I digress. It does drive home the fact that...
Does anybody have any experience with -THIS- brand of brake pad? I do like that it's a kit and comes with new caliper pins, and seals. I had to...
Not plan on keeping the truck forever. I'm guessing it will be gone <3 years. It being a regular cab truck is really wearing on me; that's another...
Watched this video a couple years ago, and they talked about various CANBUS architectures. Really interesting stuff [MEDIA]
