If you really want to know where your ignition timing is at, you gotta use something like a dial back timing light. You would also need to mark...
FWIW, here is a ported MS400 with 10 degrees of timing advance: [MEDIA]
If you ever want to go back to stock timing, just take the flywheel back off. When you re-mount it, just keep the flywheel up against the other...
Thanks! I really like these saws.
Cut video: [MEDIA]
Shots of the port work: [ATTACH] [ATTACH] [ATTACH]
Up for sale is a Husqvarna 365 Special that I just finished going through and porting. The piston was borderline, so I replaced it with a Duke’s...
As I said before, they like .375” of advance on the flywheel OD…and that is ported with a smaller combustion chamber and transfer timing fixed....
My local Stihl & Husky dealer just had a nice MS261 for sale for $400....way more saw than an MS250 or comparable Huskies.
I personally wouldn't spend the money on a "reconditioned" saw...but then again, I have a bunch of ported pro saws that I don't need. How long of...
The 362 likes more like 10 degrees of advance. If I were you, I would advance the OD of the flywheel 3/8”. The 362 has a cast-on key on the...
Nice work!
My record was some overgrown silver maple. Iirc it was about 52" diameter. My longest bar is a 36", and it was barely adequate for that job.
Dyed some flippy caps and throttle lockout lever black for my 2171.[ATTACH]
Sold
You mean a for sale thread shouldn't have an asking price or pics?
It is minty. I don't care for the extra stickers on the saw....if I were keeping it, I would be removing them.
Here is a video I took right after porting the saw: [MEDIA]
Here is a pic of the broken fin [ATTACH]
Up for sale is a very low hour MS462 Arctic I ported back in February. The saw has a WCS bark box on it and a foam air filter. The stock front...
