Read two posts up. I just called Woodstock about that.
I Jane one question about the Condar probe. They offer two different ones that are 8 inches. It says one is a 2 inch dial and the other is a 1 1/2...
So if anyone is interested in this bit of info, I called Woodstock to look into a probe to directly read the CAT temp. They say I would need an 8...
Yes. I would say it ran this aggressively before I installed the OAK. In fact, it seems like the OAK has really made no difference. I installed...
I’ve had the AS since shortly after they came out. I’ve had all sorts of problems, mostly due to myself probably. At first, I was burning wet...
Question. Maybe I’m doing this wrong. When I reload, I’ve been keeping the air fully open at 4 until the pipe temp reaches just shy of 300 then...
So the final results from last night’s burn. After stalling out the CAT and then opening the air back up, when the STT was 400 and the pipe was...
Yes. I think so.
So I just tried what you suggested Oldhippie. I opened the key damper. And I shut the air completely. And the secondaries in the front of the...
Seems like I have to engage it completely to slow it down.
So I opened the air up until the flames came back. I left it open until the stove top temp came back up to about 300. Then I closed the air to...
And correct, no key damper. I’ve opened the air up some now.
In this instance, tonight, when I engaged the cat, the stove top temp and the pipe temp were both about 300. Like I said, I immediately closed the...
I read your mind.
I’ll look into a condar probe. So i waited for the single wall pipe to reach 300, engaged the cat, closed the air control to between 0 and 1. It’s...
So tonight, I’m going to try waiting for the single wall pipe temp to almost get 300, engage the CAT, and close the air control to half way...
I’m going to try what Oldhippie says tonight. So, I’m going to wait for the pipe temp to reach just shy of 300, then engage the cat and close the...
Just to clarify. This is not my second AS. This is the original stove I bought.
Would closing the key damper in my pipe while I change the ash pan help? Or would it hurt?
Thanks. I’ll try those things.
