Will do. Do you touch up the rakers before giving the chains back? If so, at what height?
Felling and bucking. No milling, that I know of. I’ll ask to make sure, though. I know milling chains like a much more shallow top plate.
Ok. Cool. This guy knows what he’s doing, so I’ll go with that then. Thanks for the input!! Anything you would change? I’d like to give him the...
Dallas dall , I have to touch up a couple of long loops for a buddy. 135dl 3/8”. What would you recommend me doing? The first grind I posted...
I haven’t noticed anything like that there so far. At least not towards me. I appreciate the help. Hopefully we can put our minds together and...
I agree 100% on that. In this case you’re way ahead of me, though, so I’ll learn from you.
Kinda, but you’re way more advanced already. Lol
Sorry to hear you’re still not feeling good. Take your time and heal up. This thread will be here when you’re ready, and we’ll both learn together.
Thanks Jason. It may be a little too tall. It’s more difficult to set the grinder up to not hit the straps with the wheel that thick. You can see...
Definitely. And many ways to get to close to the same results, just different combinations of the set up.
Awesome. Good to know. Thanks for all the tips Dallas! I appreciate it!
Same dresser angles, but the holder is in the middle. [ATTACH] [ATTACH] [ATTACH]
That was with the holder almost all the way back. When I moved the holder to the middle, the top plate ends up at 23 degrees. Made the side plate...
This is a fresh one that hasn’t been ground on before. Looks pretty good to me. it takes a decent amount off the cutter to get the top plate that...
Awesome. The top plate ended up at exactly 20 degrees with this set up. I’ll get a chain ground this weekend or something.
Here it is. That’s 19 degree side plate. This is a Raisman chain I donated to the cause of learning. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Sorry, my top plate was at 19 degrees.
Roger that. Lemme’ see here.
I’m good Dallas. How are you? I zeroed it out above the bolt for the swing arm. Figured that would be the best and closest area to measure at...
dall Dallas, I’m ready to get scientific with it! Lol [ATTACH]
