Likewise, I don't find it cost effective to buy a runner 6421 with the intent of building a 79cc big bore. But here, we're talking about a toasted...
You: "Look..it's got a trashed engine, for goodness sakes! Do you know how expensive Makita parts are???? I'll give you $40 and take this junk out...
There's some conspiracy going on here. Could be the saw is in Switzerland wielded by the psycho carving up an insurance company. HD doesn't want...
The old Craftsman GT with Briggs 18hp Opposed Twin II will last you. Bought this one in 2007 that needed little things. The engine is 1989, so I...
Here's an HD Rental 6401 on ebay auction. Price still decent but you just don't know about P&C. I'd rather read "scored P&C" and get it for $50...
I think I'd get saw back and put a carb and purge bulb on it. Make sure fuel lines are clear and not cracked - replace if needed.
If you're near nooga..... [ATTACH]
Must be a good bar...fits most any saw. Things like pitch and bar mount are overrated. [ATTACH]
Husky 61, 268, 272. Jonsered 630, 670. May be some others.
Saw produces no spark? How did you check? Any easy way is to ground the booted plug on the cyl fins and pull rope. Try with different plugs....
There are 2 holes in above pic. Big crankcase hole = loose fit. Small fuel tank hole = tight fit. In your fuel line pic, the big shoulder should...
Check fuel tank vent on clutch side to see if leaking out of there. Basically - clutch & recoil covers off, handle bar off, 4 A/V rubbers...
And my brain knows 19mm is bigger than 17mm a whole lot quicker than 3/4 is bigger than 23/32. Let's see: 8 guzinta 32 4 times.....
MS211 takes an NGK CMR6H http://randallequipment.com/wp-content/uploads/stihl-spark-plug-guide-081413-proof-1.pdf
Search Stihl "model #" spark plug. Options should come up. I put NGK BPMR7A in a bunch of saws.
The silver bushing goes on first from the front (brake flag almost parallel with bar). then rotated back. Pull the black shroud (4-5 screws) and...
As cwn877 says, check muffler for obstruction. And look at piston and ring when muffler off. Is plug wet or dry after no start? Does carb need...
If it's the older points saw - may be as simple as cleaning and setting points. A new electronic coil paired with an electronic flywheel is...
An old Ryobi 31cc powerhead is worth fixing. I have 3 - one is a dedicated tiller. They just run and run. All they've needed is fuel lines, bulb...
Could be a worn sprocket. When valleys are cut into the ridges, chain drivers slip into the valley and make chain loose. Need new sprocket. Could...
