Won't go wrong with semi chisel,IMO. Might be a little slower but,if the wood is hard or dirty,you'll lose the extra time savings filing the...
A little off topic but still relevent. Our Sheriff has established a "safe zone" in the parking lot of his office for transferring items if...
Ran a 3/8 pitch,I think.So if it has a .050 kerf in the bar,a 33 series Stihl or 72 series Oregon would work.If it's a .063, a 36 series Stihl or...
For those who have used the Isocore or Ox,are they really head and shoulders above the other eight pound mauls? I know some of the cheaper mauls...
No,it's even farther.
Went back and checked.All manuals recommend 89 and no more than 10 percent ethanol.
I I'll check again but I'm fairly sure that's what I read.
I know the saw manufacturers recommend 89 octane but the only 89 or 93 rated in my area in 10% alcohol which I refuse to run. My bulk tank here is...
Part of the problem was from putting a 36" handle on a maul that I had a 32" on and hadn't gotten used to it yet. I'm wondering now which I should...
I've been reading about them some and they seem like a great idea.The high end European aves and maul have them from the factory. I've see videos...
New handle is here and waiting on me.I am going to be more careful to get the grain orientation right this time.That may have been a factor...
I can certainly see where higher water temps would give more heat.I guess I'm still confused about the speed.In my case,I have a plate heat...
Not that I was needing either but I just thought about them not being available. Did they have problems or were they "answers to questions that...
I bought one aout a year ago after trying a friend's 250. It has done real well for what I bought it for and has even exceeded my expectations on...
Year old thread but wanted to chime in. The XL 12 was about 3.3 cu in or54.2cc and had the manual oiler.The Super XL about 3.55 or 58cc which was...
The old 028,from what I read,was somewhat like the Ford 300 cu. in.I6.Wouldn't win any speed contests and wasn't flashy but was tough,reliable and...
The "0" series could get real confusing.Main thing I was told was,as someone pointed out, odd numbers were" homeowner or landowner" series,even...
Here's my two cents worth at fifty per cent mark down. There are a lot of variables as you probably are well aware of.Saw displacement isn't...
"Imitation is the sincerest form of flattery":D:handshake:
Seems ATC was,and may still be,owned by Cold Steel.From an old thread on a knife forum,I also read the Cold Steel version of the Viet Nam...
